Uninterruptible Power Supply

1.Product Introduction

Mapesen Uninterruptible Power Supply is with 30W 8100MA capacity to renew the power of the products,specialized CCTV euipment,indoor use only,high voltage protection,when the voltage more than 15V,the battery will be automatic power-off.When battery in charging,the limited current is 300MA for temperature and current protection.When the battery voltage lower than 11.6V,it will start charging for overcharge protection.Automatic power on,when the electricity turn off,the device will be automatic power-on,when the electricity turn on,the charging will be automatic start at the same time,the cctv camera will automatic turn on,no need to make restart of camera.Mapesen uninterruptible power supply widely use with CCTV camera,Wifi camera,CCTV recorder,router,fiber optic cat,suitable for those countries with unstable voltage and power supply.

2.Product Parameter (Specification)

3.Product Feature and Application

5.Product Qualification

Over 8 years’ experience in manufacturing CCTV products,Mapesen are with strictly quality control system to ensure every delivered products performing well and passed ISO9001. For all production,our QC and IQC department will inspect and control all of the procedures from the income materials to the finish products,and ensure 100% aging until the quality is meeting the requirement.Our AI Face Recognition Thermal Scanner Door Access Control System is all CE,FCC,RHoS qualified,and obtained high praise from customers.

6.Deliver,Shipping And Serving

7.FAQ

1.QUESTION: Can IP cameras connect to other manufacturers' NVRs?
ANSWER: Support ONVIF,can connect to other manufacturers' NVR.

2.QUESTION:How to deal with the case of forgetting the password of IP camera?
ANSWER: Provide the device model number and guide to calculate the super password.

3. QUESTION: Does IP cameras support human detection?
ANSWER: Product model number can be provided to confirm whether it supports human detectionappear.

4.QUESTION: Does the IP camera support voice broadcast alarm?
ANSWER: Specified camera models can support voice broadcast.

5.QUESTION: What is the farthest distance that IP camera usually transmits with network cable?
ANSWER: Up to 100 meters, generally recommended within 80 meters

6.QUESTION: What should I do when the IP camera does not search for an IP address?
ANSWER: Please check whether the camera is powered on, check whether the video cable is connected correctly, check whether the network segment is consistent, and use the exclusion method to check each part of camera is defective.

7. QUESTION: What should I do if I am prompted with connection failure when adding an IP camera with ONVIF protocol?
ANSWER: Check if the port number of ONVIF protocol is correct.

8.QUESTION: What should I do if the IP camera does not respond to the POE switch?
ANSWER: Please check whether there is the built-in POE module, if it support POE power supply,pls check wether the POE switch is non-standard protocol power supply.

9.QUESTION: How much amperage is used to power the IP camera?
ANSWER: Powered by DC12V2A power supply