Wirelss 4G Security CCTV Camera supplier and manufacturer - China factory

Product Description

1.Product Introduction

MAPESEN Wirelss 4G Security CCTV Camera Europe Standard,support 4G SIM card online,two-way audio,AI humanoid detection,motion detection and real-time alarm push,with 4MP 2560x1440 high definition picture quality and clarity,simple and fast Wi-Fi setup via iOS or Android device,stream video and audio directly to your smartphone, tablet, Apple Mac or Windows PC,Embedded microSD card slot that supports up to 128GB microSD cards (not included).

2.Product Parameter (Specification)

Model (Euro)	MP-L2K5I400-G1TA
Camera
Image Sensor	1/2.7" color CMOS
Effective Pixels	5MP:2560(H)x1920 (V)
Frame Rate	Main code stream: 4MP@12.5fps(50HZ),15fps(60HZ)
Frame Rate	Auxiliary stream: 800x600/640x352
Code Format	H.265/H.264
Video Bit Rate	32Kbps-6144Kbps support self-adjustable as needed, default 2048Kbps
Day & Night Mode	Color/EXTERN
Min. Illumination	Color: 0.01Lux @F1.2, B/W: 0.005Lux with IR on
IR board	2pcs IR array LEDs
Infrared Distance	30-35m
Electronic Shutter	Auto
White Balance	Auto
AGC	Auto
WDR	Digital WDR
DNR	3D DNR
Lens
Focal Length	3.6mm
Lens Type	3 Megapixel Fixed Lens
Functions
Motion Detection	Support
Human detection	Support
Email Alert	Support
Alarm linkage	The mobile detection alarm is pushed to the APP
Mirror Image	Flip horizontal/vertical
Audio	Voice intercom, built-in microphone and speaker
Storage	Built-in Micro SD card slot, Max128G, timer capture
Web Access	No
Language	ENG / CHN
Network
Network Interface	No
Networking Protocol	TCP/IP, SMTP, FTP, DHCP, DNS, DDNS, NTP, UPNP
WIFI	WiFi 802.11b/g/n
AP	Support
ONVIF	N/A
P2P	Support Max 6users, browsing at the same time (each stream: 3 users )
Mobile Surveillance	iOS, Android
PC	Support
4G Europe Standard(G1)	4G FDD-LTE: B1/B3/B7/B8/B20; 4G TDD-LTE: B38/B40/B41;
4G Europe Standard(G1)	3G WCDMA: B1/B8; 2G GSM/EDGE: 1800MHZ/900MHZ;
General
Working Temperature	-20 °C to +50 °C (- 14 °F to 122 °F )
Working Humidity	10%-90% RH (Non-condensing)
Reset	Support
Power Supply	DC12V±10%
Lightning protection	6KV
Power Consumption	Max 6W
Housing	Outdoor Metal Bullet
Weather Proof	IP67

3.Product Feature and Application

5.Product Qualification

Over 8 years’ experience in manufacturing CCTV products,Mapesen are with strictly quality control system to ensure every delivered products performing well and passed ISO9001. For all production,our QC and IQC department will inspect and control all of the procedures from the income materials to the finish products,and ensure 100% aging until the quality is meeting the requirement.Our AI Face Recognition Thermal Scanner Door Access Control System is all CE,FCC,RHoS qualified,and obtained high praise from customers.

6.Deliver,Shipping And Serving

7.FAQ

1. How do I fix it if I can't connect and there's no ding-dong sound?
ANSWER: If the ding-dong sound is not emitted, the camera needs to be restored to factory settings manually, With a silver pin inserted into the camera Reset hole inside about 8S to hear the reset tone after releasing .

2. How do I fix wireless pairing failure?
ANSWER: In the process of wifi pairing, the phone and camera should be close to each other, and the wireless name and password should not appear special symbols and Chinese characters, or the pairing will fail.

3.The camera shows online, but can not be displayed when click in to watch,how to solve it?
ANSWER: It's the network that's causing the connection buffering, just reboot the router and camera.

4. How to solve the problem of AP hotspot not being searchable?
ANSWER: A.If you can't find the equipment hotspot, first check if there is a network cable connected to the network port on the tail line, you need to unplug the cable and reboot before the hotspot can appear.
B.If there is no hotspot after unplugging and rebooting, you need to restore the factory settings of the device manually. Press and hold the tail-wire reset button for about 10 seconds, release it and the reset is successful, wait for about 40S before the hotspot appears after reset.

5. How to fix unsuccessful WIFI connection problem?
ANSWER: A. During WIFI setup, the camera should be close to the router and the router should be working normally. The wifi name and password can not have special symbols and Chinese characters, otherwise the configuration will not work.
B. Can't connect to a 5G wifi network.

Hot Tags: Wirelss 4G Security CCTV Camera, Manufacturer, Supplier, Factory, China, Wholesale, Buy, Customized, In stock, Bulk, Cheap, Discount, Low Price, CE, Price list, Quotation, Advanced, Quality